Chapter 3 Using the console interface 149Using the BayStack 380 10/100/1000 SwitchTable 32 describes the System Log screen fields.Console/Comm Port Configuration screenThe Console/Comm Port Configuration screen (Figure 73) allows you toconfigure and modify the console/comm port parameters and security features of aswitch.To open the Console/Comm Port Configuration screen:Table 32 System Log screen fieldsField DescriptionDisplay MessagesFromThis field allows you to select the RAM source your messages are obtainedfrom. Choose Non Volatile (NVRAM) or Volatile (DRAM) + Non Volatile. Use thespacebar to toggle between the options.Default Non VolatileRange Non Volatile, Volatile, Volatile + Non VolatileDisplay configurationcomplete?This field allows you to determine whether the configuration information receivedfrom NVRAM/DRAM (depending on what is selected in the Display MessagesFrom field) is complete. Use the spacebar to toggle between the options.Default NoRange No, YesClear Messages From This field allows you to clear the information messages from DRAM, NVRAM orboth. If you clear DRAM messages, existing NVRAM messages are copied intoDRAM. After a system reset, all existing NVRAM messages are copied toDRAM. Use the spacebar to toggle between the options.Default NoneRange None, NVRAM, DRAM + NVRAMChoose Console/Comm Port Configuration (or press o) from the main menu.
