Chapter 3 Using the console interface 169Using the BayStack 380 10/100/1000 SwitchTable 39 describes the Configuration File Download/Upload screen fields.Table 39 Configuration File Download/Upload screen fieldsField DescriptionConfiguration ImageFilenameThe file name you have chosen for the configuration file. Choose ameaningful file name that will allow you to identify the file for retrieval whenrequired. The file must already exist on your TFTP server and must be read/write enabled.Default Value Zero-length stringRange An ASCII string of up to 30 printable charactersTFTP Server IP Address The IP address of your TFTP load host.Default Value 0.0.0.0 (no IP address assigned)Range Four-octet dotted-decimal notation, where each octet isrepresented as a decimal value, separated by a decimalpointCopy ConfigurationImage to ServerSpecifies whether to copy the presently configured switch parameters to thespecified TFTP server (default is No).Use the spacebar to toggle the selection to Yes.Press [Enter] to initiate the process.Default Value NoRange Yes, NoRetrieve ConfigurationImage from ServerSpecifies whether to retrieve the stored switch configuration parameters fromthe specified TFTP server (default is No). If you choose Yes, the downloadprocess begins immediately and, when completed, causes the switch to resetwith the new configuration parameters.Use the spacebar to toggle the selection to Yes.Press [Enter] to initiate the process.Default Value NoRange Yes, No
