Chapter 4 Troubleshooting 173Using the BayStack 380 10/100/1000 Switch10/100/1000Speed/LinkStatusindicatorAlternatingGreen/AmberOn The corresponding port is set to operate at 10 Mb/s, andthe link is good.(10) Blinking The corresponding 10 Mb/s port has been disabled bysoftware.Off The link connection is bad, or there is no connection tothis port.SolidAmberOn The corresponding port is set to operate at 100 Mb/s, andthe link is good.(100) Blinking The corresponding port has been disabled by software.Off The link connection is bad, or there is no connection tothis port.SolidGreen(1000)On The corresponding port is set to operate at 1000 Mb/sand the link is good.Blinking The corresponding 1000 Mb/s port has been disabled bysoftware.Off The link connection is bad, or there is no connection tothis port.Activity Port activity Green Blinking Indicates network activity for the corresponding port. Ahigh level of network activity can cause the LEDs toappear to be on continuously.Note: The speed indicator LED for a port operating at 10 Mb/s is solidamber for 5 seconds, then switches to green for 1 second. It alternates inthis way while the switch is on.Table 41 BayStack 380 switch LED descriptionsLabel Type Color State Meaning
