Using the Console Interface309985-B Rev 00 3-37Table 3-11. MAC Address Security Table Screen FieldsField DescriptionFind an Address Allows you to search for a specific MAC address that is used in any of theMAC Address Security Table screens.MAC Address Allows you to specify up to 448 MAC addresses that are authorized to accessthe switch. You can specify the ports that each MAC address is allowed toaccess using the Allowed Source field (see next field description). Thespecified MAC address does not take effect until the Allowed Source field isset to some value (a single unit/port number or a port list value that youpreviously configured in the MAC Address Security Port Lists screen). You canclear an existing MAC address field by entering zero (0) in the field andpressing [Enter].Default - - - - - (no address assigned)Range A range of 6 Hex Octets, separated by dashes (multicast 1 andbroadcast addresses are not allowed).1 Multicast address -- Note that the first octet of any Multicast address will always be an odd number.Allowed Source Allows you to specify the ports that each MAC address is allowed to access.The options for the Allowed Source field include a single unit/port number or aport list value that you have previously configured in the MAC AddressSecurity Port Lists screen.Default - (Blank field)Range A single unit/port or a port list value (for example, 1/3, 1/6,3/4, S1, S5, etc.).
