Introduction to the BayStack 410-24T Switch309985-B Rev 00 1-71Trunk Configuration Screen for Switch S4As shown in Figure 1-40, switch S4 is set up with one trunk configuration (T5).This trunk connects directly to switch S1.As in the previous screen examples, to set up a trunk configuration chooseMultiLink Trunk Configuration from the MultiLink Trunk Configuration Menuscreen.Figure 1-45 shows the MultiLink Trunk Configuration screen for switch S4.Figure 1-45. MultiLink Trunk Configuration Screen for Switch S4MultiLink Trunk ConfigurationTrunk Trunk Members (Unit/Port) STP Learning Trunk Mode Trunk Status----- ------------------------------- ------------ --------------- ------------1 [ /5 ][ /11 ][ / ][ / ] [ Normal ] Basic [ Enabled ]2 [ / ][ / ][ / ][ / ] [ Normal ] Basic [ Disabled ]3 [ / ][ / ][ / ][ / ] [ Normal ] Basic [ Disabled ]4 [ / ][ / ][ / ][ / ] [ Normal ] Basic [ Disabled ]5 [ / ][ / ][ / ][ / ] [ Normal ] Basic [ Disabled ]6 [ / ][ / ][ / ][ / ] [ Normal ] Basic [ Disabled ]Trunk Trunk Name----- ------------------1 [ S4:T5 to S1 ]2 [ Trunk #2 ]3 [ Trunk #3 ]4 [ Trunk #4 ]5 [ Trunk #5 ]6 [ Trunk #6 ]Enter text, press or when complete.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
