Using the BayStack 410-24T 10BASE-T Switch3-60 309985-B Rev 00Figure 3-25. MultiLink Trunk Configuration ScreenTable 3-22 describes the MultiLink Trunk Configuration screen fields.Table 3-22. MultiLink Trunk Configuration Screen FieldsField DescriptionTrunk Column header for the read-only fields in this screen. The read-only data displayed in theTrunk column indicates the trunk (1 to 6) that corresponds to the switch ports specified inthe user-configurable Trunk Members fields.Trunk Members(Unit/Port)The Trunk Members column contains fields in each row that can be configured to createthe corresponding trunk. The Unit value in the (Unit/Port) field is configurable only whenthe switch (unit) is part of a stack configuration. It indicates that the trunk members inthis row are associated with the specified unit number configured in the Unit field. Eachswitch port can only be a member of a single trunk. The appropriate trunk number foreach trunk member configured within this field is shown adjacent to the correspondingswitch port in the following screens: Port Configuration screen, and Spanning TreeConfiguration screen.Default Value blank fieldRange 1 to 8 or 1 to 28 (depending on model type)(continued)MultiLink Trunk ConfigurationTrunk Trunk Members (Unit/Port) STP Learning Trunk Mode Trunk Status----- ------------------------------- ------------ --------------- ------------1 [ 3/6 ][ 3/7 ][ 3/9 ][ 3/17 ] [ Normal ] Basic [ Enabled ]2 [ 4/25 ][ 4/26 ][ / ][ / ] [ Normal ] Basic [ Enabled ]3 [ 6/13 ][ 6/14 ][ / ][ / ] [ Normal ] Basic [ Enabled ]4 [ 5/19 ][ 5/20 ][ / ][ / ] [ Normal ] Basic [ Enabled ]5 [ 8/22 ][ 8/23 ][ / ][ / ] [ Normal ] Basic [ Enabled ]6 [ 3/2 ][ 1/2 ][ 7/2 ][ 5/6 ] [ Normal ] Basic [ Disabled ]Trunk Trunk Name----- ------------------1 [ U3:T1 to FS2]2 [ U4:T2 to S2]3 [ U6:T3 to S2]4 [ U5:T4 to S3]5 [ U8:T5 to S4]6 [ Distributed Trunk]Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.