Using the BayStack 410-24T 10BASE-T Switch4-8 309985-B Rev 00Software Download Error CodesTable 4-3 describes error codes that are associated with the software downloadprocess. The error codes appear only on the console screen of the switch that isconnected to your TFTP load host during the software download process.If an error code appears during the download process, perform the appropriatecorrective action provided in Table 4-3. If the suggested corrective action does notresolve the problem, contact your Nortel Networks Technical Solutions Center(see “How to Get Help” in the Preface section of this guide).Table 4-3. Software Download Error CodesError code Description Corrective action2001 Download process failed to transmitpacket to other stack units.Check the stack cable connections, then repeatthe software download process.2002 TFTP load host failed to respond to ARPrequest.Verify that your TFTP load host is operationaland check that the connectivity between theswitch/stack and the TFTP load host is valid.2003 Received image failed CRC check. Verify that the switch software image is valid (notcorrupted) and repeat the software downloadprocess.2004 The download process has lostsynchronization with the TFTP loadhost.Verify that your TFTP load host is operational,then repeat the software download process.2005 TFTP timeout. The software downloadhas timed out due to network congestionor the load host has stoppedresponding.Verify that your TFTP load host is operational,then repeat the software download process.2006 File access error. Check that the file name of the software image iscorrect, and that the file protection is properlyset for access.2007 Non-data packet received from theTFTP load host.Check that the file name of the software image iscorrect.2008 Requested software image is too large. Check that the file name of the software image iscorrect, and that you are accessing theappropriate software image for your switch.(continued)
