Using the Console Interface309985-B Rev 00 3-99TELNET ConfigurationThe TELNET Configuration screen (Figure 3-42) allows you to communicatewith the BayStack 410-24T switch from a remote console terminal. You can haveup to four active TELNET sessions at one time.Choose TELNET Configuration (or press t) from the main menu to open theTELNET Configuration screen.Figure 3-42. TELNET Configuration ScreenTable 3-36 describes the TELNET Configuration screen fields.TELNET ConfigurationTELNET Access: [ Enabled ]Login Timeout: [ 1 minute ]Login Retries: [ 3 ]Inactivity Timeout: [ 15 minutes ]Event Logging: [ All ]Allowed Source IP Address Allowed Source Mask------------------------- -------------------------[ 0.0.0.0 ] [ 0.0.0.0 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ][ 255.255.255.255 ] [ 255.255.255.255 ]Use space bar to display choices, press or to select choice.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.