104 Certificates and Client AuthenticationStep Action1 Put the certificate file and key file on your TFTP/FTP/SCP/SFTP server.Note: You may arrange to include your private key in thecertificate file. When the specified certificate file is retrievedfrom the TFTP/FTP/SCP/SFTP server, the NVG software willanalyze the contents and automatically add the private key,if present (the screen output appears "Certificate added" and"Key added" in this case). If the private key is included, youdo not have to perform step 5.2 Initiate the process of adding a certificate usingTFTP/FTP/SCP/SFTP.Type the command /cfg/cert and press ENTER. Specify anunused certificate index number, and then type the commandimport.Make sure to specify a certificate number not in use by anexisting certificate. To view basic information about all configuredcertificates, use the /info/certs command.>> Main# cfg/certEnter certificate number: (1-) certificate you want to configure>>> Certificate 1# importSelect protocol (tftp/ftp/scp/sftp) [tftp]: ftpEnter host name or IP address of server: name or IP address>3 Enter the desired file name.Enter filename on server: Retrieving VIP_1.crt from 192.168.128.584 If you are importing the file from an FTP server you areprompted for a user name.Log in to the FTP server with your user name and password. Foranonymous mode, the following string is used as the password(for logging purposes): admin@hostname/IP.isd.You may also be prompted for a password phrase (if specifiedwhen creating or exporting the private key)Nortel VPN GatewayUser GuideNN46120-104 02.01 Standard14 April 2008Copyright © 2007-2008 Nortel Networks.
