| 
Adding an ASA 310-FIPS to an Existing Cluster 71login: bootPassword: ForgetMe*** Reinstall Upgrade Procedure ***If you proceed beyond this point, the active networkconfiguration will be reset, requiring a reboot torestore any current settings. However, no permanentchanges will be done until the boot image has beendownloaded.Continue (y/n)? [y]: 2 Confirm the network port setting, and the IP networksettings.(reinstall procedure, continued)Select a network port (1-4, or i for info) [1]: ENTER if correct, or change to the port you are using fornetwork connectivity>Enter VLAN tag id (or zero for no VLAN tag) [0]: tag id or ENTER>Enter IP address for this iSD [192.168.128.185]:brackets is correct.>Enter network mask [255.255.255.0]: correct.>Enter gateway IP address [192.168.128.1]: if correct.>Note: If the VPN Gateway has not been configured fornetwork access previously, or if you have deleted the VPNGateway from the cluster by using the /boot/deletecommand, you must provide information about networksettings such as interface port, IP address, network mask,and gateway IP address. No suggested values related toa previous configuration will be presented within squarebrackets.3 Select a download method, specify the server IP address,and the boot image file name.Nortel VPN GatewayUser GuideNN46120-104 02.01 Standard14 April 2008Copyright © 2007-2008 Nortel Networks. |
