154 Troubleshooting the NVG>> Main# maint/hsm/loginVerify that HSM-USER iKey (blue) is inserted in card 0(with flashing LED).Hit enter when done.Enter the current HSM-USER password for card 0: the password associated with the HSM-USER iKey for card0>Successful login on card 0.Verify that HSM-USER iKey (blue) is inserted in card 1(with flashing LED).Hit enter when done.Enter the current HSM-USER password for card 1: the password associated with the HSM-USER iKey for card1>Successful login on card 1.Note: If you enter the wrong password for the HSM-USERfifteen (15) times in a row, the HSM-USER iKey will berendered unusable. This is due to the strict securityspecifications placed on the ASA 310-FIPS.3 Verify that the alarms that caused the ASA 310-FIPS to stopprocessing SSL traffic have been cleared.>> # /info/events/alarms** (alarm) Active Alarm List ***************************************The hsm_not_logged_in alarms that were triggered during thereboot should now be cleared from the active alarm list, after thesuccessful login to both HSM cards. The ASA 310-FIPS is nowready to process SSL traffic again.--End--Nortel VPN GatewayUser GuideNN46120-104 02.01 Standard14 April 2008Copyright © 2007-2008 Nortel Networks.