Check the IP Address Configuration 147Check the IP Address ConfigurationIf your host is allowed to access the VPN Gateway over the networkaccording to the Access List, check that you have configured the correct IPaddresses on the VPN Gateway. Make sure you ping the host IP addressof the VPN Gateway, and not the Management IP (MIP) of the cluster inwhich the VPN Gateway is a member. Type the command /cfg/cur systo view IP address information for all VPN Gateways in the cluster.If the IP address assigned to the VPN Gateway seems to be correct, youmay have a routing problem. Try to run traceroute (a global commandavailable at any menu prompt) or the tcpdump command (or some othernetwork analysis tool) to locate the problem. For more information aboutthe tcpdump command, see the "Network Traffic Dump Commands" section under Configuration Menu>SSL Configuration Menu in theCommand Reference.If this does not help you to solve the problem, contact Nortel for technicalsupport. See “How to Get Help” (page 14).Nortel VPN GatewayUser GuideNN46120-104 02.01 Standard14 April 2008Copyright © 2007-2008 Nortel Networks.
