472 Nortel Networks Symposium Web Center PortalTroubleshooting Standard 2.0Logging configurationIntroductionThe Symposium Web Center Portal Log Configuration window allows you tochoose where you want to store logging information for the system. You mustset up the log file directory through the Symposium Web Center Portal LogConfiguration window. You can filter these events from the event codes whenyou are experiencing problems with your system. The log files are stored in..\SWCPLogs stored on the same drive as the operating system.From the Symposium Web Center Portal Log Configuration window, you canchoose! the verbosity or severity of the logging that you want to filter! the Symposium Web Center Portal components for which you want to viewthe logs. Only the components installed on the server appear in the list. Alog file is created for each of the components.! the directory in which the system stores the log filesThe verbosity ranges from 1 to 6, as follows:1. Critical errors only — Only critical errors. Critical errors requireimmediate action to resolve a system failure.2. Critical and major errors — All critical and major errors. Major errorsare reported when the system is working; however, the functionality isimpaired.3. All errors — All critical, major, and minor errors. Minor errors arereported when the system is working as is most of the functionality;however, some of the functionality is impaired.4. All errors and first-level trace information — Debugging information atthe page level.5. All errors, first- and second-level trace information — Debugginginformation at the functional level.6. All errors and all levels of trace information — All debugginginformation.
