10 AFP-200 PN 15511:H2 10/14/2002About This ManualScope of this ManualThis manual contains the following:Section 1 “System Overview” provides a description of the control panel and systemcomponents, a list of related system documentation, electrical specifications, andcabinet dimensions.Section 2 “Installation” provides instructions for installing the basic and optionalsystem components, and provides a checklist for testing an installed system and thebatteries.Section 3 “Programming” provides instructions for customizing the fire alarm systemby selecting and setting program options for addressable SLC devices, NACs, andPanel Circuits.Section 4 “Operation” provides instructions for operator use of the fire alarm system.Appendix A “Power Supply Calculations” provides current draws for systemcomponents and calculation tables for determining the power required to operate thecontrol panel during fire alarm and AC loss of power conditions.Appendix B “NFPA Applications” provides information and wiring diagrams forsetting up the control panel for NFPA applications.Appendix C “Annunciators” provides information about annunciating control panelpoints and contains instructions and wiring diagrams for connecting annunciators to thecontrol panel.Appendix D “Releasing Applications” provides information and wiring diagrams forsetting up the control panel for releasing applications.Appendix E “Combination Fire/Burglary Applications” provides information andwiring diagrams for setting up the control panel for security applications.Appendix F “Wire Requirements” provides wire requirements for circuits connected tothe control panel.Appendix G “Pre-Alarm (AWACS™) Applications” provides information and wiringdiagrams for setting up the control panel for AWACs applications.Appendix H “Special Zones” provides descriptions and options for Special Zones usedto define presignal and PAS selections, Time Control selection, Holiday selections, andNAC Code Types.Appendix I “Terminal Interface Protocol” provides detailed information about theterminal operating modes: Local Terminal Mode (LocT), Local Monitor Mode (LocM),and Remote Terminal Mode (RemT). The appendix also contains instructions for usinga CRT-2 for Read Status and Alter Status (Change Status) operations.Appendix J “Expansion Power Supplies” provides information and wiring diagrams forsetting up the panel to use external power supplies.Appendix K “UL Power-limited Wiring Requirements” provides UL wiringrequirements and sample wiring diagrams for power-limited and nonpower-limitedwiring.Appendix L “U.S. Coast Guard & Lloyd’s Register” provides a list of equipmentsuitable for use in marine and shipyard applications as compatible with this controlpanel.Technical Manuals Online! - http://www.tech-man.com
