Using the CRT-2 for Alter Status Terminal Interface ProtocolAFP-200 PN 15511:H2 10/14/2002 173I.3.6 View the History BufferFrom the Read Status menu, select History-Step, option 4. This option lets you stepthrough the history buffer one event at a time:Step through the history buffer one event at a time by pressing the Next (F5) or Prior(F6) function keys.I.3.7 Send the History Buffer to the CRT-2From the Read Status menu, select History-All, option 5. This option sends the entirehistory buffer to the CRT-2, from most recent event to oldest event:I.4 Using the CRT-2 for Alter StatusI.4.1 OverviewThis section shows how to do Alter Status functions, Table 66, from a CRT-2.Table 66 Alter Status FunctionsSYSTEM RESET 3:17A Fri 08/20/974WThe first line that appears displays themost recent event in the history buffer.PressPress% to scroll forwardthrough the history buffer.Press ^ to scroll backthrough the history buffer.****************************** EVENT HISTORY START***************************ALARM: HEAT(ANALOG) DETECTOR ADDRESS 55 ZONE 55 3:10A 04/20/97 D55ALARM: SMOKE(PHOTO) DETECTOR ADDRESS 29 ZONE 01 3:15A 04/20/97 D29ACKNOWLEDGE 3:16A Fri 04/20/97SYSTEM RESET 3:17A Fri 04/20/97******************************* EVENT HISTORY END ***************************5W Most recent eventPressFunction Lets you...Disable Enable or disable detectors, modules, or NACs.Sensitivity Change the sensitivity of any addressable detector in the system.Clear Verification Clear the verification counter for all the addressable detectors in thesystem.Clear History Clear the contents of the history buffer.Set Action/Alert Set the Pre-Alarm for the Alert or Action level.Technical Manuals Online! - http://www.tech-man.com
