Specifications System OverviewAFP-200 PN 15511:H2 10/14/2002 271.11 SpecificationsThis section contains electrical specifications for the control panel.1.11.1 Primary AC Power (TB7)Primary AC connections are made through TB7 on the AFP-200. Wire size: minimum14 AWG with 600 VAC insulation.• AFP-200. 120 VAC, 50/60 Hz, 3.0 A• AFP-200E. 220/240 VAC, 50/60 Hz, 1.5 A1.11.2 Battery (lead-acid only)Maximum Charging Circuit Dual Rate High Charge is 29.1 V @ 0.7 ANormal Flat Charge is 27.6 V @ 0.5 AMaximum Battery Capacity 18 AH. (Batteries larger than 12 AH require a BB-17or other UL-listed battery cabinet.)1.11.3 Signaling Line Circuit (TB6)Connections between the control panel and the Signaling Line Circuit (SLC) aresupervised and power-limited.Voltage 24 VDC nominal, 27.6 VDC Max.Maximum length 10,000 ft. (3048 m) per channel (NFPA Style 4) or10,000 ft. (3048 m) total twisted-pair length (NFPAStyle 6 and 7)Maximum loop current is 250 mA (max short circuit) or 100 mA (normal)Maximum loop resistance 40 ohms1.11.4 Notification Appliance and Releasing Circuits (TB2)The following contains specifications for NACs and releasing circuits available on theAFP-200 (all circuits are power-limited).Max. wiring voltage drop 2 VDCNormal Operating Voltage 24 VDC.NAC circuit 1 2.5 ANAC circuits 2-4 2.5 A shared totalCurrent for all external devices 5.0 AOptional AVPS-24/AVPS-24E Additional 3.0 A of notification appliance power (seeAppendix J “Expansion Power Supplies”)Optional APS-6R Additional 6.0 A of notification appliance power (seeAppendix J “Expansion Power Supplies”)Max. signaling current/circuit 2.5 AEnd-of-line resistor 4.7K, 1/2-Watt (PN 71252 UL-listed) for NACs)Releasing circuits REL-4.7K; for control module — REL-47KTechnical Manuals Online! - http://www.tech-man.com
