Intelligent Detectors System OverviewAFP-200 PN 15511:H2 10/14/2002 211.5.10 Trim RingThe TR-4XG gray trim ring is available for semi-flush mounting of the control panelcabinet. See Figure 7 on page 29 for an illustration of the trim ring installed.1.5.11 Battery BoxThe BB-17 battery box may be used to mount two 18 AH batteries. The box mountsdirectly below the control panel cabinet. See Figure 6 on page 28 for an illustration ofthe battery box dimensions.1.5.12 Dress PanelA dead front dress panel (DP-AFP200) is available as anoption (required for Canadian and FM installations).1.5.13 Expansion Power Supplies(AVPS-24 and APS-6R)Power supply model AVPS-24/AVPS-24E provides anadditional 3 amps of notification appliance power(Appendix J “Expansion Power Supplies”) and the APS-6R provides 6 amps ofadditional notification appliance power. Refer to the Device Compatibility Documentfor compatible notification appliances.1.5.14 Marine CabinetCabinet CAB-AM is required for applications requiring United States Coast Guard orLloyd’s Register approvals. Refer to Appendix L “U.S. Coast Guard & Lloyd’sRegister” on page 187.1.6 Intelligent DetectorsIntelligent, addressable detectors provide analog information to the control panel on aSignaling Line Circuit (SLC). This allows the control panel to continually process thisinformation to determine the status of each detector (alarm, trouble, maintenance, ornormal). Each detector responds to an SLC address that is set in the detector head usingbuilt-in rotary decimal switches. The sensitivity of each intelligent detector can beprogramed at the control panel. (Refer to Section 3 “Programming” for details.)Detector heads mount to a separate base for ease of installation and replacement, asdescribed below.A blinking LED on an intelligent detector indicates communication between thedetector and the control panel.Detectors• FSI-751. Analog, addressable, low profileintelligent smoke detector that incorporates anionization sensing chamber. Designed to provideopen area protection.• FSP-751. Same as FSI-751, but uses aphotoelectric sensing chamber. The FSP-751T addsthermal sensors that will alarm at a fixedtemperature of 135° F. Designed to provide openarea protection.FSI-751, FSP-751Technical Manuals Online! - http://www.tech-man.com
