5 Network settings5-70 CS240SNMP v3 settingsSpecify the detailed settings for SNMP v3. Settings can be specified for the following.Parameter DescriptionContext Name Settings Specify the context name. Use the keyboard that appears in the touch panel totype in the context name (63 characters or less).Discovery User Permissions Select whether or not to enable the discovery user permissions.Discovery User Name Settings Specify the discovery user name. Use the keyboard that appears in the touch pan-el to type in the discovery user name (32 characters or less).Read User Name Settings Specify the read user name. Use the keyboard that appears in the touch panel totype in the read user name (32 characters or less).Security Level Select the authentication security level.Password Setting(Read)Specify the authentication password. Type in a password (32 characters or less)for each security level.If "auth-password" is selected, type in "Read auth".If "auth-password/privpassword" is selected, type in "Read auth" and "Read priv".Write User Name Settings Specify the write user name. Use the keyboard that appears in the touch panel totype in the write user name (32 characters or less).Security Level Select the authentication security level.Password Setting(Write)Specify the authentication password. Type in a password (32 characters or less)for each security level.If "auth-password" is selected, type in "Write auth".If "auth-password/privpassword" is selected, type in "Write auth" and "Write priv".
