CS240 3-65Scanning 3Original settingsSpecify the type of document that is loaded, for example, if it contains mixed page sizes or is folded in azigzag.2 NoteThese functions can be used together.1 Touch [Original Settings] in the Fax/Scan mode screen.2 Select settings for the Original Settings functions.Parameter DescriptionMixed Original Select this setting when documents of different sizes are loaded into the ADF (option-al). The scan speed is decreased since the size of each page is detected before it isscanned.Z-Folded Original Select this setting to detect the size of a zigzag-folded document by the length fedthrough the ADF.Long Original Select this setting for documents that are longer than the standard size.Original Direction Select the orientation of the document. After the document is scanned, the data isprocessed so that it is correctly oriented.Binding Position Select the binding position, such as when holes are punched in the document or thedocument is stapled. In addition, specify the binding position when a double-sideddocument is loaded.This adjusts the scan of double-sided documents so that the binding position is notreversed.Left Select this setting for a document with binding on the left side.Top Select this setting for a document with binding at the top.Auto The binding is on the long side if the page is 297 mm or less, or it is on the shortside if the page is more than 297 mm.Despeckle Select this setting to reduce the effect that dust on the left partition glass has on imag-es when the document is loaded into the ADF.
