3 Scanning3-18 CS240The entered addresses appear under "Broadcast Destinations".4 Touch [Scan Settings], [Original Settings] or [Communication Settings], and then specify the desiredscan settings.– For details on the scan settings, refer to "Specifying scan and transmission settings (Scansettings/Original settings/Communication settings)" on page 3-31.5 Load the document into the ADF or place it on the original glass.6 Press the [Start] key in the control panel.Scanning of the document begins, and the data is sent.2 NoteDo not turn off the machine until the scan job is deleted from the Job List screen.Selecting a destination that was searched forFollow the procedure described below to search for the desired destination. This procedure describes anadvanced search.!DetailIn order to perform an Address Search, settings for the LDAP server must be specified fromAdministrator mode. For details, refer to "Enabling LDAP" on page 5-46.For details on performing an Address Search, refer to "Selecting a destination with an address search"on page 3-20.Parameter DescriptionIndex This button appears if "Address Book Default" (displayed by touching [Custom Dis-play Settings] on the User Settings screen, then [Fax/Scan Settings]) is set to "Ad-dress Type". The index characters can be searched based on the character that wasspecified when the destination was registered.Address Type This button appears if "Address Book Default" (displayed by touching [Custom Dis-play Settings] on the User Settings screen, then [Fax/Scan Settings]) is set to "In-dex". The destination types can be searched based on the type that was specifiedwhen the destination was registered.Detail Search Type in the destination name or part of the address to search for the correspondingaddress.Address Search An LDAP search can be performed if an LDAP server is being used, for example, foruser management. Search the addresses registered on the LDAP server for the ad-dress that corresponds to the conditions. A basic search, where a keyword is en-tered, and an advanced search, where multiple conditions are used to narrow downthe search, are available.
