CS240 3-17Scanning 37 Press the [Start] key in the control panel.Scanning of the document begins, and the data is sent.2 NoteDo not turn off the machine until the scan job is deleted from the Job List screen.Entering addresses directlyUsing the control panel to directly type in the destination address when scanning is called "direct input".1 Press the [Fax/Scan] key in the control panel.The Fax/Scan mode screen appears.2 Touch [E-Mail] on the Direct Input screen.A screen appears, allowing you to type in the address of the destination.? Why is the Direct Input tab not displayed?% If the "Manual Destination Input" (displayed by touching [Security Settings] on the AdministratorSettings screen, then [Security Details]) is set to "Restrict", the Direct Input tab does not appear.3 Type in the address of the destination, and then touch [OK].– To specify additional destinations, repeat steps 2 and 3.– Frequently entered user names and domain names can be registered to be recalled and used again.First, prefixes and suffixes must be registered in Administrator mode.
