CS240 3-29Scanning 3Entering addresses directlyUsing the control panel to directly type in the destination address when scanning is called "direct input".Settings can be specified for the following.Detailed Settings1 Press the [Fax/Scan] key in the control panel.The Fax/Scan mode screen appears.2 Touch [FTP] on the Direct Input screen.A screen appears, allowing you to type in the host name for the destination and the file path.? Why is the Direct Input tab not displayed?% If the "Manual Destination Input" (displayed by touching [Security Settings] on the AdministratorSettings screen, then [Security Details]) is set to "Restrict", the Direct Input tab does not appear.Parameter DescriptionHost Name Specify the host name or IP address for the destination. Type using the keyboardthat appears, and then touch [OK].File Path Specify the path to the destination folder. Type using the keyboard that appears, andthen touch [OK].User Name Type in the user name used to log on, and then touch [OK].Password Specify the password. Type using the keyboard that appears, and then touch [OK].Parameter DescriptionPort Number Type in the port number.PASV Select whether or not the PASV (passive) mode is used. Touch [Yes] or [No].Proxy Select whether or not a proxy server is used. Touch [Yes] or [No].
