VL6522c/VL5522c/VL4522c 9-179.2 One-Touch/User Box Registration 9Reference- To check a registered destination, select its registered name, and then press [Check Job Set].- To change the settings for a registered destination, select its registered name, and then press[Edit].- To delete a registered destination, select its registered name, and then press [Delete].Item DescriptionNo. Press [No.], and then enter the registration number of the destination be-tween 1 and 2,000. Press [OK] without entering any number to register thesmallest number available.Name Use the touch panel to enter the name to be registered in the address bookusing up to 24 characters.User ID Enter the user ID for logging into the destination computer via the touch panel(up to 63 bytes).Password Enter the password for logging into the destination computer via the touchpanel (up to 63 characters).Host Address Enter the host name, IPv4 address or IPv6 address as the host address forthe destination server.The host name must be less than 63 characters in length.• If you enter a host name and then select to enter an IP address, the hostname is cleared.• If you enter the IP address and then press [Input Host Name], the IP ad-dress is saved and displayed in the input screen.• Before entering the host name, check that the DNS settings are correctlyspecified. For details, refer to the "User's Guide [Network Administrator]".File Path Enter the destination file path for saving data via the touch panel (up to 142bytes).Proxy Select whether or not a proxy server is used.SSL Settings Select whether to enable SSL.Port Number Enter the port number (any number between 1 and 65535).Index Select the index. For a frequently used destination, specify the index charac-ters and select [Favorites] at the same time. This allows you to find it moreeasily.Icon Select an icon.• The selected icon is used for the image panel function that is availablewhen the optional function code "CAA" is enabled.
