Administrator Settings (G3)1010-26 VL6522c/VL5522c/VL4522c10.4Forward TX SettingYou can forward received documents to a preset recipient. The items that are to be configured are listedbelow.If two units of the fax kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] inAdministrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line.For details on [Individual Receiving Line Setup], refer to page 10-37.The following items are not available if Forward TX Setting is configured.- PC-Fax RX Settings- TSI User Box Settings- Memory RX SettingIf "Confirm Address (Register)" is ON, a screen for entering the fax number again appears after you press[OK]. Enter the fax number and then press [OK].d ReferenceFor details on the Confirm Address function, refer to page 10-23.Item DescriptionOutput Method Forward & Print: Received document are forwarded and printed on this ma-chine.Forward & Print (If TX Fails): Received documents are forwarded and, if for-warding fails, are printed on the machine.Forward Dest. Allows you to enter a fax number using up to 38 digits. It is also possible toselect it from the address book.Select Line If two units of fax kit FK-502 are installed, this setting can be specified foreach line.
