VL6522c/VL5522c/VL4522c 13-1113.5 Fax Glossary 1313.5 Fax GlossaryThis section describes the general terms used in the fax communications.Explanations may be given of the terms of functions that are not included in this machine.Term DescriptionAddress Book A function of registering frequently used fax numbers of recipients. When regis-tering abbreviated addresses, you should also register the destination name andthe search string, so that you can specify the destination using the search stringto select.Background Remov-alA function to adjust the shading of background color before sending the docu-ment.Batch transmission A function to send documents as one document at a specified time if the docu-ments have the same transmission conditions such as destination, transmissiontime, memory transmission or resolution, and are stored in the same memory.Baudrate Baudrate indicates, for the fax, the transmission rate of a modem.This machine can communicate at a high transmission rate of 33,600bps. Whenselecting overseas communication mode, the machine communicates at7200bps or 4800bps, a rate suitable for noise-resistance.Binding position A function to specify the binding position of a double-sided document when it issent using ADF. Two types of binding positions are available for a double-sideddocument: One is the top and bottom binding with the binding position at the topor bottom of the document. The other is left and right binding with the bindingposition at the left or right of the document. Note that the second side of the doc-ument has a different top or bottom relation.Book Copy A function of, when sending a fax of a book or catalog, separating the front cov-er, back cover, right pages, and left pages into individual pages.bps The acronym for bit per second, a unit of data transmission, indicating theamount of data transmitted per second.Broadcast A transmission of a single document to many recipients in one operation.Bulletin board A function of posting documents to be viewed, or stores the documents to betransmitted via polling.Check Dest. & Send A function to send a fax after comparing the specified fax number with the faxnumber information of the recipient (CSI). Only when those numbers match, thefunction sends the fax. If the numbers are not matched, a transmission error oc-curs. Therefore, this prevents misdirected transmissions. The sender's faxnumber must be correctly registered with recipient's machine.Closed Network RX A function to accept only transmissions from recipient machines with a matchingpassword.Confidential commu-nicationA function to transmit a document to specific persons you want them to read it.Documents sent via confidential communication are not printed when received,and are saved in a confidential box of the recipient's fax machine. The documentcan be printed by some specific operation such as entering the access code forthe confidential box.Default value A setting value configured for the machine prior to shipment from the factory.Some default values can be changed by using the settings menu. It is convenientto set a frequently used value to the default value according to your application.Dialing Method Three types are provided for Dialing methods: PB (push-button dialing), 10PPS(pulse dialing/ 10 pps), and 20PPS (pulse dialing/ 20 pps).ECM (Error Correction Mode)ECM is the error resending method used for G3 communication. ECM checkswhether the data is correctly sent to the destination, and should it be not thecase, ECM resends the same data while maintains the serial communication. Ifa receiver also provides the ECM mode, this machine uses the ECM-based com-munication with the receiver unless the ECM mode is disabled.
