VL6522c/VL5522c/VL4522c 11-511.1 Proof Print 112 While [Current Jobs] is displayed, press [Release Held Job].The Release Held Jobs screen appears.3 From the job list, select the job you want to print.% To print the remaining number of copies, continue with Step 6.% To change the printing conditions, continue with Step 4.% If the job you want to release is not displayed, press [ ] or [ ] until the desired job is displayed.If an incorrect job was selected, touch the button for the selected job again to deselect it.4 Press [Change Settings].The Change Settings screen appears.% To check the results of setting changes, select the job whose sample copy is to be printed from thejob list, and then press the [Proof Copy] key on the control panel.One copy is printed for checking.After performing the [Proof Copy] key, the original settings are restored. Configure the settings againas necessary.5 Change the printing conditions in the Change Settings screen, and then press [OK].The Release Held Jobs screen appears again.% To cancel releasing the held job, press [Cancel].6 Press [OK] or the [Start] key in the control panel.The stored job is changed to an active job, and then printed.
