VL6522c/VL5522c/VL4522c 5-75.1 Mac OS X 10.2/10.3/10.4/10.5 58 Click [Add].When the selected printer is registered in the "Print & Fax", the setting procedure is completed.% If the "Installable Options" window appears, proceed to change the option settings as necessary.For details, refer to page 9-5.Reference- For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.Configuring the IPP settingsTCP/IP setting for the machineSpecify the IP address for the machine.IPP setting for the machineIn "IPP Setting" for the machine, enable IPP printing.d ReferenceFor details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".For details on the IPP settings for the machine, refer to the "User's Guide [Network Administrator]".Configuring the TCP/IP settings for the computerConfigure the TCP/IP settings for the Macintosh computer connected to the printer.1 In the "Apple" menu, select "System Preferences".2 Click the [Network] icon.3 The Ethernet setting window appears.% For OS X 10.5, select "Ethernet", and then click [Advanced].% For OS X 10.4, select "Built-in Ethernet", and then click [Configure].4 Click the "TCP/IP" tab.5 Configure the settings including the IP address and subnet mask according to the settings of thenetwork to which the Macintosh computer is connected.6 Click the close button at the top left corner of the window.% When the "This service has unsaved changes" message appears, click [Apply].Adding a printer1 In the "Apple" menu, select "System Preferences".2 Click the [Print & Fax] icon.3 Click [+] on the "Print & Fax" window."Printer Browser" appears.4 Click [IP] or [IP Printer].5 In "Protocol", select "IPP".6 In "Address", enter the IP address for the machine. In "Queue", enter "ipp".The printer driver corresponding to this machine being identified with its IP address is automaticallyselected.% After the printer driver is selected, go to Step 8.% If an incorrect printer driver is selected, go to Step 7.
