Mac OS X 10.2/10.3/10.4/10.555-4 VL6522c/VL5522c/VL4522c5.15.1.2 Selecting and connecting a printer (OS X 10.4/10.5)In OS X 10.4/10.5, the printer can be connected with Bonjour, AppleTalk, LPR (LPD), or IPP.After configuring the network setting for the machine, selecting this machine as the printer to be used in the"Printers and Faxes" window enables printing.Configuring the Bonjour settingsConfiguring the Bonjour settings for the machineEnable Bonjour in "Bonjour Setting" for the machine, and then enter the Bonjour name.d ReferenceFor details on the Bonjour settings for the machine, refer to the "User's Guide [Network Administrator]".Adding a printer1 In the "Apple" menu, select "System Preferences".2 Click the [Print & Fax] icon.3 Click [+] on the "Print & Fax" window.4 Click [Default].Connected printers are detected.% If no printer is detected, turn your printer off then on again.In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.If you turn the printer on immediately after turning it off, it may not function correctly.5 From the "Printer Name" list, select the desired Bonjour-connected model name.The printer driver corresponding to the selected printer name is automatically selected.% After the printer driver is selected, go to Step 7.% If an incorrect printer driver is selected, go to Step 6.6 Select the desired printer driver manually.% When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then selectthe printer driver of the desired model name from the list.% When OS X 10.4 is used, select "GENERIC" from the "Print Using", and then select the printer driverof the desired model name from the list.7 Click [Add].When the selected printer is registered in the "Print & Fax", the setting procedure is completed.% If the "Installable Options" window appears, proceed to change the option settings as necessary.For details, refer to page 9-5.Reference- For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.
