Mac OS X 10.2/10.3/10.4/10.555-8 VL6522c/VL5522c/VL4522c5.17 Select the desired printer driver manually.% When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then selectthe printer driver of the desired model name from the list.% When OS X 10.4 is used, select "GENERIC" from the "Print Using", and then select the printer driverof the desired model name from the list.8 Click [Add].When the selected printer is registered in the "Print & Fax", the setting procedure is completed.% If the "Installable Options" window appears, proceed to change the option settings as necessary.For details, refer to page 9-5.Reference- For OS X 10.4, you can also add a printer by clicking [Add] in the "Printer Setup Utility" window.5.1.3 Selecting and connecting a printer (OS X 10.2/10.3)In OS X 10.2/10.3, the printer can be connected with Rendezvous, AppleTalk, LPR (LPD), or IPP.After configuring the network setting for the machine, selecting this machine as the printer to be used in"Printer Setup Utility" or "Print Center" enables printing.Configuring the Rendezvous settingsConfiguring the Bonjour settings for the machineEnable Bonjour in "Bonjour Setting" for the machine, and then enter the Bonjour name.d ReferenceFor details on the Bonjour settings for the machine, refer to the "User's Guide [Network Administrator]".Adding a printer1 Select "Macintosh HD" - "Applications" - "Utilities" where the driver was been installed, and thendouble-click [Printer Setup Utility] or [Print Center] to open it.2 When the "You have no printers available." window appears, click [Add]. When the printer list appears,click [Add].% If available printers have already been specified, the "You have no printers available." window doesnot appear.3 Select "Rendezvous" for the connection method.Connected printers are detected.% If no printer is detected, turn your printer off then on again.In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.If you turn the printer on immediately after turning it off, it may not function correctly.4 From the "Name" list, select the desired model name.The printer driver corresponding to the selected printer name is automatically selected.% After the printer driver is selected, go to Step 6.% If an incorrect printer driver is selected, go to Step 5.5 Select the desired printer driver manually.% From "Printer Model", select "GENERIC", and then select the desired model from the list of modelnames.6 Click [Add].When the selected printer is registered in the "Printer List", the setting procedure is completed.
