Windows Vista/Server 200844-8 VL6522c/VL5522c/VL4522c4.1Installing the printer from the Network window0 Installing the driver to Windows Vista/Server 2008-based computers requires the administratorauthority.1 Turn on the power of the machine while it is connected to the network.Since the printer is searched for during the installation, be sure to connect the machine to the network.2 To use the Web service print, check that "Network discovery" is enabled in "Network and SharingCenter" on the computer.3 Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.4 Press the [Start] key, and then select "Network".The "Network" window appears, starting to search for the computers and devices on the network.5 Select the device name of the machine, and then click "Install" on the toolbar.% If the "User Account Control" window appears, click [Continue].A printer compatible with the selected Web service print function is located, and then the "Found NewHardware Wizard" dialog box appears.6 Follow the instructions on the pages that follow.% If the "User Account Control" window appears, click [Continue].% If the "Windows Security" window for verifying the publisher appears, click "Install this driversoftware anyway".d ReferenceThe operating steps in the "Found New Hardware Wizard" dialog box are the same as those described in"Installing the printer driver by specifying the IP address using the Add Printer Wizard". For details, refer toSteps 11 through 20 in the succeeding section.Installing the printer driver by specifying the IP address using the Add PrinterWizard0 Installing the driver to Windows Vista/Server 2008-based computers requires the administratorauthority.0 Since the printer is searched for during the installation, be sure to connect the machine to the networkbefore turning it on.1 Turn on the power of the machine while it is connected to the network.Since the printer is searched for during the installation, be sure to connect the machine to the network.2 To use the Web service print, check that "Network discovery" is enabled in "Network and SharingCenter" on the computer.3 Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.4 Press the [Start] key, and then select "Control Panel".5 Click "Printer" under "Hardware and Sound".The "Printers" window appears.% When "Control Panel" is displayed in Classic View, double-click "Printers".6 Click [Add a printer] on the toolbar.The "Add Printer" window appears.7 Click "Add a local printer".The "Select a Printer Port" page appears.8 Click "Create a new port", and then select the port type.% Select "Standard TCP/IP Port".
