Mac OS X 10.2/10.3/10.4/10.555-10 VL6522c/VL5522c/VL4522c5.1Configuring the LPR settingsTCP/IP setting for the machineSpecify the IP address for the machine.LPD setting for the printerBefore using LPR printing, enable LPD printing in "LPD Setting" for the machine.d ReferenceFor details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]".Configuring the TCP/IP settings for the computerConfigure the TCP/IP settings for the Macintosh computer connected to the printer.1 In the "Apple" menu, select "System Preferences".2 Click the [Network] icon.3 From "Show", select "Built-in Ethernet".4 Click the "TCP/IP" tab.5 Select the "Configure" item and configure the settings including the IP address and subnet maskaccording to the settings for the network to which the Macintosh computer is connected.6 Click the close button at the top left corner of the window.% When the "Apply configuration changes" message appears, click [Apply].Adding a printer1 Select "Macintosh HD" - "Applications" - "Utilities" where the driver was been installed, and thendouble-click [Printer Setup Utility] or [Print Center] to open it.2 When the "You have no printers available." window appears, click [Add]. When the printer list appears,click [Add].% If available printers have already been specified, the "You have no printers available." window doesnot appear.3 Select "IP Printing" for the connection method.4 For OS X 10.3, select "LPD/LPR" for "Printer Type".5 In "Printer Address", enter the IP address for the machine.6 From "Printer Model", select "GENERIC", select the desired model from the list of model names, andthen click [Add].When the selected printer is registered in the "Printer List", the setting procedure is completed.