Cannot configure the settings/Cannot print according to the settings1414-6 VL6522c/VL5522c/VL4522c14.214.2.2 Others14.2.3 Error messageCannot punch. Printed pages may be fed outwithout being punched if the pa-per is loaded into the papersource with an incorrect orienta-tion.Check the orientation setting.The punch position is not as ex-pected.The orientation setting is notcorrect.Check the punching position inthe printer driver settings.Combination fails; pages are notcombined, but are printed sepa-rately.Originals having different orien-tations are combined.Align the orientations of the origi-nal.The overlay is not printed prop-erly.Memory of the computer maybe insufficient.Simplify the overlay to reduce thedata size.Overlay data was created incolor.For color overlay data, the overlayis printed in color even if GrayScale is selected with the PCLdriver.Images are not printed properly. Memory of the computer maybe insufficient.Simplify the images to reduce thedata size.Paper is not fed from the speci-fied paper source.Paper will not be fed from thespecified paper source if thatpaper source is loaded with pa-per of a different size or orienta-tion.Load the paper of the appropriatesize and orientation into the de-sired paper source.The user authentication or ac-count track setting field isgrayed out and cannot be spec-ified.User authentication or accounttrack may be disabled on theWindows printer driver.In the "Configure" tab, enableuser authentication or accounttrack.Problem Possible Cause RemedyProblem Possible Cause RemedyCannot install the printer driver. It has already been installed inWindows Vista/Server 2008 as aprinter compatible with the Webservice print function.If you try to install a printer driverin Windows Vista/Server 2008 byuse of the Web service print func-tion, it is recognized as installedbefore the actual installation iscompleted. Uninstall the printer inthe "Network" Window, and theninstall it again.Message Cause and remedyCannot connect to the network. A connection to the network was not able to be established. Makesure that the network cable is correctly connected. In addition, makesure that "Network Settings" in "Administrator Settings" have beencorrectly configured.
