VL6522c/VL5522c/VL4522c 4-34.1 Windows Vista/Server 2008 44 Manual Installation Using the Add Printer WizardThis chapter describes the procedure for installing the Windows printer driver using the standard WindowsAdd Printer function.- After installation, correctly configure the initialization conditions such as the model name, installedoptions, function version, user authentication and account track functions for the machine in the"Configure" tab of the printer driver before use. For details, refer to page 9-5.4.1 Windows Vista/Server 20084.1.1 For network connection (LPR/Port 9100/SMB)In Windows Vista/Server 2008, you can install the printer driver either by searching for the printer on thenetwork, or by creating a new printer port.Settings for the machineBefore using Port 9100, LPR, or SMB printing, you must configure the network settings for the machine.d ReferenceFor details on the network settings for the machine, refer to the "User's Guide [Network Administrator]".To use SMB printing in the IPv6 environment, "Direct Hosting setting" for the machine must be enabled. Fordetails, refer to the "User's Guide [Network Administrator]".Installing the printer driver by searching for the printer using the Add PrinterWizard0 Installing the driver to Windows Vista/Server 2008-based computers requires the administratorauthority.0 Since the printer is searched for during the installation, be sure to connect the machine to the networkbefore turning it on.1 Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.2 Press the [Start] key, and then select "Control Panel".3 Click "Printer" under "Hardware and Sound".The "Printers" window appears.% When "Control Panel" is displayed in Classic View, double-click "Printer".4 Click [Add a printer] on the toolbar.The "Add Printer" window appears.Items to be configured DescriptionIP address In "TCP/IP Settings" of the machine, specify the IP address.RAW port number To use Port 9100 printing:In [TCP/IP Settings] for the machine, enable the RAW port number(initial setting: "9100").LPD Setting To use LPR printing:In [LPD Setting] for the machine, enable LPD printing.SMB Setting To use SMB printing:At [Print Settings] in [SMB Settings] for the machine, specify NetBI-OS Name, Print Service Name, and Workgroup.
