- 110 -4. TroubleshootingColor of the printed image is not what you expectCause Solution ReferenceThe toner is low. If "Toner Low" or "Toner Empty.Replace with new Toner Cartridge."appears, replace the toner cartridge.Replacing the Toner Cartridges(User's Manual)The setting of [Black Finish] is notsuitable for the application.On the printer driver, select[Composite Black (CMYK)] of [TrueBlack (K)] for [Black Finish].Changing Black FinishThe color adjustment has beenmodified.Do color matching from the printerdriver. Using Color Matching on PrinterDriverThe color balance is out ofadjustment.On the touch panel, press [DeviceSettings] > [Admin Setup] > [ColorSetup], and adjust density or colorbalance.Correcting Density ManuallyAdjusting Color Balance(Density)Color registration is out of alignment. Open and close the output tray. Or, onthe touch panel, press [DeviceSettings] > [Admin Setup] > [ColorSetup], and then [Adjust Registration].Print SetupSolid printing of CMY 100% is too lightCause Solution Reference[CMY100% Density] is set to[Disable].On the touch panel, press [DeviceSettings] > [Admin Setup] > [ColorSetup] > [CMY100% Density], andthen select [Enable].-
