- 191 -7. Utility SoftwareWeb Page of This MachineYou can make network settings or menu settings from the Web page of this machine.• Open the Web Page of This Machine• Log In as the Administrator• Changing the Administrator Password (Web Page)• Checking or Changing the Settings of This Machine• Encrypting Communication with SSL/TLS• Using IPP• Encrypting Communication with IPSec• Limiting by Using an IP Address (IP Filtering)• Limiting by Using a MAC Address (MAC Address Filtering)• E-mail Alert• Using SNMPv3• Using IEEE802.1X (Wired LAN)• Setting IEEE802.1X (Wireless LAN)• Setting the LDAP Server• E-mail Setup (Web Page)• Setting Power Save Mode (Web Page)• Setting Sleep Mode (Web Page)• Setting Auto Power Off Mode (Web Page)• JOB MACRO (Web Browser)• About Items That Can be Set or Checked• Check whether your browser is set as follows.• Set the security setting for the Web page to the middle level, or enable Cookie.• To enter the [Admin Setup] menu, the administrator password is required. The factory default password is"999999".• To change settings of the machine on the Web page, you must log in as the administrator of the machine.The description uses the following environment as an example.• Device name: C542• IP address of the machine: 192.168.0.21 Start a Web browser.2 Enter "http://(The IP address of this machine)" in the address bar, and thenpress the key.About the IP Address of this machine, refer to "Printing a Report to Check".If the IP address includes a value in one or two digits, do not enter "0" before the value. Communications may notbe performed correctly.• An example of a correct entry: http://192.168.0.2/• An example of an incorrect entry: http://192.168.000.002/Open the Web Page of This Machine
