- 251 -7. Utility SoftwareYou can set the network settings for this machine by starting Network Card Setup.• Enabling Web Settings1 Start Network Card Setup.Installing Software2 Select this machine from the list.3 Select [Web Settings] from the [Operations] menu.4 Check [Device web settings will be enabled], and then click [Save].5 Enter the administrator password, and then click [OK].• The factory default password is "999999".• The password is case sensitive.6 Click [OK] in a confirmation window.• Opening the Web page1 Starts Network Card Setup.Installing Software2 Select this machine from the list.3 Select [Show Device Webpage] from the [Operations] menu.The Web page opens, and the machine status page is displayed.1 Select [Quit] from the [Network Card Setup] menu.Configuring Web Settings Quitting Network Card Setup
