- 111 -5. Management / Setting the PrinterIf you enable encryption, communication is encrypted immediately after the settings ischanged from the Web page.1 Open the Web page of this machine.Open the Web Page of This Machine2 Log in as the administrator.3 Select [Admin Setup].4 Select [Network] > [Security] > [SSL/TLS].5 Select [Enable] for the protocol to which apply the encryption.6 Click [Submit].Exporting a CertificateThis section describes how to export a certificate on the Web page.For functions that communicate with SSL/TLS, a procedure to trust the exported certificate isrequired on the computer.Import the exported certificate of this machine into the trusted certificate store of thecomputer to trust the certificate.1 Open the Web page of this machine.Open the Web Page of This Machine2 Log in as the administrator.3 Click [Admin Setup].4 Select [Network] > [Security] > [SSL/TLS].5 Select [Export Certificate] to export a certificate.• You can export a certificate in PEM format.Add this machine to your computer as an IPP printer.If you enable IPP print, you can send print data to this machine via the Internet.Setting This Machine as the IPP Printer in a Windows Environment1 Open the "Printer folder" and select [Add a Printer].2 Select [Add a network, wireless or Bluetooth printer] in the [Add Printer]wizard.3 Select [The printer that I want isn't] from the list of available printers.4 Select [Select a shared printer by name].5 Enter "http://(The IP address of this machine)/ipp" or "http://IP address of thismachine)/ipp/lp", and then click [Next].6 Click [Have Disk].7 Insert the "Software DVD-ROM" into the computer.8 Enter the following value in [Copy manufacturer's files from], and then click[Use].• For PCL driver: "D: Drivers _PCL"• For PS driver: "D: Drivers PS"• The above value is an example of the DVD-ROM drive is set to the D drive.9 Select the INF file, and then click [Open].10 Click [OK].11 Select a model, and then click [OK].12 Click [Next].13 Select [Finish].Using IPP
