- 36 -3. Changing the FinishYou can adjust the half-tone density of CMYK colors printed by the printer. Use this function ifthe color in a photograph or graphic is too dark.• This function can be used with PS Printer Driver.PS Gamma Adjuster UtilityYou can adjust the print mode for monochrome pages.• To enter the [Admin Setup] menu, an administrator password is necessary.1 Press the scroll button several times to select [Admin Setup] and thenpress the «ENTER» button.2 Enter the administrator password using the numeric keypad.The default password is “123456”.3 Press the «ENTER» button.4 Press the scroll button to select [Print Setup] and then press the «ENTER»button.5 Press the scroll button to select [Mono-Print Mode] and then press the«ENTER» button.6 Select a speed mode and then press the «ENTER» button.• [Auto]: When the first page is a monochrome page, it is printed only with a blackimage drum, and when a color page appears, it is printed with four color imagedrums. After that, even a monochrome page is printed using four color image drums.• [Color Mode]: Always printed with four color image drums.• [Normal Mode]: For a monochrome page, it is printed with a black image drum, andfor a color page, it is printed with four color image drums.7 Press the «ON LINE» button to exit the menu mode.Adjust the Half-tone Density Changing the Mono-Print Mode
