- 90 -5. Management / Setting the PrinterKey operation sound, error alert sound, job completion notification, AirPrint checking sound,buzzers to be emitted when an IC card is held can be turned on or off. Their volume can alsobe adjusted.• [Card Hold Buzzer Volume] is only available when the optional IC card authentication kit is installed. It is displayedwhen the access control function is activated.1 Press the scroll button several times to select [Admin Setup] and thenpress the «ENTER» button.2 Enter the administrator password using the numeric (0-9) keys.The factory default password is "123456".3 Press the «ENTER» button.4 Press the scroll button or several times to select [Buzzer Setup] andpress the «ENTER» button.5 Press the scroll button or to select the setup menu on which you wantto change a setting and then press the «ENTER» button.6 Adjust the volume of the selected item, and then press the «ENTER» button.7 Press the «ON LINE» button to exit the menu mode.Panel Lockout Off Disables button/key operation on the operator panel.[Mode1]: Disables all keys except for ONLINE, Settings, Cancel, Power save,and Help.[Mode2]: Enables all keys except for ONLINE and Settings.[Off]: Does not restrict button/key operation on the operator panel.After AC powersupply failsAlwaysOffSets whether to resume the printable machine automatically when the powersupply stops due to power stoppage, etc.Always On:The machine reboots forcibly when the power supply restores without pressingthe power switch.Plug the power code into the outlet, the device reboots.Always Off:The machine does not reboot automatically when the power supply restores.Turn on the machine to press the power switch.Last State:The machine memorizes the state at the time when the power supply stoppedand restores the state when the power supply restores. If the power supply stopsdue to the power stoppage, etc. while the machine is turned on, this functionautomatically restores the printable state when the power supply restores. If themachine is off when the power supply stops, the machine does not reboot eventhough the power supply restores.Item FactoryDefaultDescription Setup the Buzzer
