- 168 -6. Utility SoftwareDelete the printer registered to Monitoring Tool.1 Select [Start] > [Okidata] > [Monitoring Tool] and start Monitoring Tool.2 Select [Delete printer] from the [Settings] menu.3 Select the printer you want to delete, and then click [Delete].• If you cannot solve a problem with the following solutions, contact your dealer.• For problems caused by an application, contact the manufacturer of the application.• If firmware update has failedDeleting a Printer Problems on Monitoring ToolCause solution ReferenceThe machine has failed to connect tothe server.Check the internet connection. -The entered administrator passwordis incorrect.Check the administrator password. -The machine is turned off. Check that the machine is turned on,then try firmware update again. If the"Executing Maintenance" message isdisplayed on the operator panel, waituntil the machine enters standbystatus and try again.-The machine is not connected. Connect the machine. -The machine is currently in use. Update the firmware when themachine is not in use.-An error has occurred in the machine(no toners, paper jams, etc.).Solve the error, then update thefirmware.-
