- 27 -2. Printing on Various Types of PaperPrinting on Long PaperWhen printing on long paper, change the paper type setting, and use the MP tray and rearoutput tray.Set a paper size for the MP tray on the operator panel. Then, register a paper size and paperweight with a printer driver.Paper sizes of from 55 to 297 mm in width and from 90 to 1321 mm in length can beregistered.• Register the paper size so that the length is longer than the width. You cannot set the length that is shorter than thewidth.• This function may not be available for some applications.• If the paper length exceeds 356 mm, the print quality may not be guaranteed even if the paper is used under therecommended conditions.• Loading Long Paper1 Load paper in the MP tray.2 Open the rear output tray.3 Press the «Fn» key.4 Press the «9» and «0» on the numeric keypad and then press the «ENTER»button.5 Press the scroll button several times to select [Custom] and then press the«ENTER» button.6 Press the «BACK» button.7 Press the scroll button to select [X Dimension] and then press the«ENTER» button.8 Enter the paper width value using the numeric keypad and then press the«ENTER» button.9 Press the «BACK» button.10 Press the scroll button to select [Y Dimension] and then press the«ENTER» button.11 Enter the paper length value using the numeric keypad and then press the«ENTER» button.12 Press the «ON LINE» button to exit the menu mode.Available long paperSupported Paper (User's Manual)• For Windows PCL Printer Driver1 Open the file to print.2 Select [Print] from the [File] menu.3 Click [Preferences].4 Select [User Defined Size] from [Size] on the [Setup] tab.• You can select the paper size from [Banner *** x *** mm] if the paper size is set to 210.0 x 900.0 mm,215.0 x 900.0 mm, or 215.0 x 1200.0 mm, 297.0 x 900.0 mm, 297.0 x 1200.0 mm.For instructions on how to set custom size, refer to "Printing on Custom Size Paper".5 Select [Multi Purpose Tray] from [Source].6 Change paper weight and the other settings if necessary, and then click [OK].7 Click [Print] on the [Print] screen.• For Windows PS Printer Driver (C834/C844/ES8434)1 Open the "Printer folder".2 Right-click the [OKI C844 PS] icon, and then select [Printing Preferences].3 Click [Advanced] on the [Layout] tab.
