- 115 -5. Management / Setting the PrinterYou can control access to the machine by using an IP address. You can set whether to allowfor setting or printing from a specified IP address. IP filtering is disabled by factory default.• Be sure to specify the correct IP address. An incorrect entry of an IP address does not allow for access to the printerby using the IP protocol.• If you enable IP filtering, access to hosts that are not specified in this setting is rejected.1 Open the Web page of this machine.Open the Web Page of This Machine2 Log in as the administrator.3 Select [Admin Setup].4 Select [Network] > [Security] > [IP Filtering].5 Specify detailed settings by following the on-screen instructions.• If nothing is registered in [Administrator's IP Address to Register], any access to the machine may not beallowed depending on the specified IP address range.• If you use a proxy server, [Your Current Local Host/Proxy IP Address] and the IP address of your host may notmatch.6 Click [Submit].The new settings take effect when the network function of this machine restarts.• You can use only IPv4 for IP filtering.You can control access to the machine by using a MAC address. You can allow for or rejectaccess from a specified MAC address.• Be sure to specify the correct MAC address. An incorrect entry of a MAC address does not allow for access to themachine from a network.1 Open the Web page of this machine.Open the Web Page of This Machine2 Log in as the administrator.3 Select [Admin Setup].4 Select [Network] > [Security] > [MAC Address Filtering].5 Specify detailed settings by following the on-screen instructions.• If nothing is registered in [Administrator's MAC Address to Register], access to the machine may not beallowed depending on the specified MAC address.• If you use a proxy server, [Your Current Local Host/Proxy MAC Address] and the MAC address of your hostmay not match.6 Click [Submit].The new settings take effect when the network function of this machine restarts.• You cannot specify to accept or to reject for each address.Limiting by Using an IP Address (IP Filtering) Limiting by Using a MAC Address (MAC Address Filtering)
