- 129 -6. Utility SoftwareInstalling SoftwareInstall the utility you want to use by following the procedure below.• For WindowsInstall utility software by using the Software DVD-ROM.Connect the machine to a computer via a network or USB interface.• Check the status of this machine before installing.- This machine is turned on.- This machine is connected to a network with a network cable and the IP address or other settings are set.1 Insert the "Software DVD-ROM" into a computer.2 When [AutoPlay] is displayed, click [Run Setup.exe].• If the [User Account Control] dialog is displayed, click [Yes].3 Select a language from the drop-down list.4 Read the license agreement, and then click [Accept].5 Read Environmental advice for Users and click [Next].6 Click [Network Connection] or [USB Connection] corresponding to yourconnection environment.If the [Windows Security Alert] dialog is displayed, click [Allow access].7 Select the model name of this machine, and then click [Next].8 Click [Individual Install].9 Click a driver or software to install.Installation starts.
