- 163 -6. Utility SoftwareNetwork Card Setup (Mac)You can use Network Card Setup to configure the network.To use Network Card Setup, TCP/IP must be activated.• Setting the IP Address• Configuring Web Settings• Quitting Network Card Setup1 Start Network Card Setup.Installing Software2 Select this machine from the list.3 Select [IP Address Settings] from the [Operations] menu.4 Change other settings if necessary, and then click [Save].5 Enter the administrator password, and then click [OK].• The factory default password is "123456".• The password is case sensitive.6 Click [OK] to enable new settings.The network card of this machine restarts.Setting the IP Address
