Oki CX3641MFP Technical Reference

Also see for CX3641 MFP: Configuration guide Module guide Handy reference Technical user guide Technical reference

Contents

Oki CX3641MFP Technical Reference Manual pdf 70 page image

S POT -ON 709 Select the desired target color in the Spot-On Color Search dialog box and click OK.The edited color appears in the color list of the Spot-On main window.Using a measurement instrument to target colorsIf you have the Densitometer ED-100 or Spectrophotometer ES-1000, you can importmeasured color values directly into Spot-On. This feature allows you to target matchesbased on the actual colors of immediate objects, such as the red of a printed logo or theyellow of a packaging envelope.For best results, download and save any measurement data you have gathered with theED-100 in its offline state. Spot-On automatically clears stored data when it establishes aconnection with the instrument. For information about downloading stored data from theED-100, see the documentation that accompanies the instrument.TO IMPORT COLOR MEASUREMENTS INTO S POT -ON1 Install and set up the ED-100 or ES-1000 for use with your computer.For installation and setup instructions, see the documentation that accompanies theinstrument.2 Choose Start from the Instrument menu in the Spot-On main window.The Choose Instrument dialog box appears.3 For Instrument, choose the instrument you will use to take measurements. For Port, choosethe serial port connection of the instrument. Click OK.For the ED-100, the indicator light on the instrument flashes for a few moments as theconnection to Spot-On is established. When the flashing stops, the instrument is ready toread measurements.4 Place the ED-100 or ES-1000 over the target color, making sure to center the sample apertureover the color. Press Measure to take the measurement.The measured CMYK values are imported into Spot-On as follows:• If an individual color is selected in the color list, it updates to the measured color.• If a group is selected in the color list, a new color with the measured values is createdwithin the group.• If the Spot-On Color Search dialog box is open, the center patch updates with themeasured values, and the neighbor patches update accordingly.• If the Set Center Patch Color dialog box is open, the measured values are imported intothe CMYK entry fields.5 When you are finished taking color measurements, choose Stop from the Instrument menu.Spot-On closes the connection to the instrument.