4.2.11 Cover Assy OPE(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 4.2.4 / 4.2.5)(2) Remove the Plate-Shield. (Refer to 4.2.6)(3) Remove the FFC cable from the CU-board.(4) Remove the two screws (Black) ① . Remove the Cover-Assy-Ope ② .(5) Assembling is performed by the reverse procedure with removing.(Note on removing / assembling)1. Beware of not to touch the DC motor inattentively (Do not rotate motor).4.2.12 Ope PCB Assy(1) Remove the Cover Assy Ope. (Refer to 4.2.11)(2) Remove the two screws (Black) ① .(3) Remove the Ope PCB Assy ② .(4) Remove the FFC cable and the LCD ③ .(5) Assembling is performed by the reverse procedure with removing.(Note on removing / assembling)1. When remove the LCD ③ , remove the two tab together, beware of notto load to LCD4-144. REPLACEMENT OF PARTS
