Closed the Cover Assy StackerRelease lever4.2.13 Cover Assy Stacker(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 4.2.4 / 4.2.5)(2) Remove the Plate-Shield. (Refer to 4.2.6)(3) Remove the screw ① and disconnect FFC cable from board.(4) Remove the two screws (Silver) ② . Remove the Cover-Eject ③ and Plate-Rear ④ .(At this moment, Head cable is also removed.)(5) With the Cover Assy Stacker closed, detach Lever-Link-Fuser ⑤ (on bothsides) from the Cover Assy Stacker.(6) Remove the Cover Assy Stacker ⑥ and two Spring-Torsion-ST ⑦ , ⑧ .(7) Assembling is performed by the reverse procedure with removing.(Note on removing / assembling)1. Beware of not to touch the DC motor inattentively (Do not rotate motor).4-154. REPLACEMENT OF PARTS
