2. PRINTER SETUP2.3 Loading SuppliesE2-112.3.2 Loading the Ribbon(Cont.)3. Push Ribbon along the Ribbon Shafts to a position where the ribbon isfully to the Left against the stoppers when fitted.4. Lower the Print Head Block and set the Ribbon Shaft HolderPlate aligning its holes with the Ribbon Shafts.5. Take up any slack in the ribbon. Wind the leading tape onto theribbon take-up roll until the ink ribbon can be seen from thefront of the printer.6. Turn the Head Lever to Lock position to close the Print Head.7. Close the Top Cover.Ribbon Shaft Holder Plate
