2.PRINTER SETUP2.11 Sensor SettingE2-612.11 Sensor Setting If a paper jam error still occurs even after a threshold setting has beenperformed, register the voltage level of media to the media sensor.Contents of the Sensor Adjust MenuMenu ParameterTEMPERATURE Displays the ambient temperature andprint head temperature.SensorAdjustREFLECT Registers the voltage level of tag paper’sprint area to the reflective sensor (Blackmark sensor).TRANS. Registers the voltage level of label gap tothe transmissive sensor (Gap sensor).PE REFL./TRANS. Registers the voltage level of no paper tothe reflective/transmissive sensor.RIBBON Registers the voltage level of ribbon to theribbon end sensor.Power OFFSystem ModeTurn on the power while holding down[FEED] & [PAUSE] or [MODE].• Self diagnosis• Parameter setting• Fine adjustment• Test print• Sensor adjustment• RAM clear• Interface setting• BASIC mode• RFID setting• Real Time Clock• Z-MODE• USB memory• ResetSYSTEM MODE<3>ADJUST SET<4>TEST PRINT<5>SENSOR ADJUST<6>RAM CLEAR
