Oki LE840DT User Manual

Also see for LE840: Technical reference

Contents

2. PRINTER SETUP2.6 Printer SettingE2-142.6 Printer Setting Depending on the settings of your host computer or the interface beingused it may be necessary to change the printer parameter settings.Follow the procedures described below to change the printer parametersettings to correspond to your environment.NOTE:Incorrect settings can cause the printer not to function correctly. If youhave any problems with the parameter settings, please contact your nearestOki Data service representative.For the settings this manual does not cover, please contact your nearest OkiData service representative, or refer to the LE840/LE850 Key OperationManual.ONLINE ModeUser System ModePower ON[PAUSE]PAUSE stateHold down [RESTART]Power OFFHold down [MODE] Reset Parameter setting (Section 2.6.2) Fine adjustment (Section 2.9) LAN/WLAN (Section 2.6.3) BASIC (Section 2.6.4) Z-MODE (Section 2.6.5) Auto calibration (Section 2.6.6) Dump mode (Section 2.6.7) Log (Section 2.6.8)System ModeTurn on the power while holdingdown [FEED] & [PAUSE] or[MODE]. Self diagnosis Parameter setting Fine adjustment Test print Sensor adjustment RAM clear Interface setting (Section 2.6.10) BASIC mode RFID setting Real Time Clock (Section 2.6.11) Z-MODE USB memory (Section 2.6.12) ResetReboot the printerSelect [RESET] menuReboot the printerSelect [RESET] menu